1-248-887-3187

Wholesale

Weekdays 9AM - 5PM EST

Mobile Home - Manufactured Housing

×
Exterior Anchors & TieDowns Doors & Windows Coatings & Sealants Appliance Tools & Hardware Interior Trim Vents & Registers Plumbing Electrical Transport & Safety Heating & Cooling
Home / Plumbing / Valves
LF BRASS GATE VALVE
Valve - LF brass gate (3/4") 375358 $17.25
BRASS GATE VALVE
Valve - Gate (1/2") 26-2020 $10.80
Valve - Gate (3/4") 26-2025 $13.01
THREADED BOILER DRAIN
Valve - Drain (1/2") 26-2040 $ 6.55
Valve - Drain (3/4") 26-2045 $ 6.72
WASHING MACHINE VALVE
One-piece. brass body. Tailpiece: 2.5". Combination. .5 solder or threaded connection with locknut. 1/2"
 
Valve - Wash machine 379915 $ 7.86
SILLCOCK
Warning: Do not use this product with water systems that convey or dispense water for human consumption. 150PSI WWP - heavy pattern. Brass body. Female IPS X Hose End. Adjustable packing nut. Buna-N seat. Not for potable water use. Available for irrigation and outside non-potable water useCast brass. See more Sillcocks.
 
Sillcock - (1/2") 260808 $ 9.76
BRASS BACKFLOW PREVENTER (ProPlus)
Fits hose bibs & sillcocks, standard hose thread. Lead free.
 
Valve - 3/4" Vacuum breaker 157298 $ 6.34
CHECK VALVE
Brass with stainless steel springs.
 
Valve - (3/4" FPT x 3/4" MPT) 22-1150 $10.65
SPRING CHECK VALVE
Homewerks Worldwide's spring loaded inline check valves help to prevent backflow and provide pressure relief in irrigation systems. Our high quality design provides durability and reliability through its brass construction, rubber O ring seal, and stainless steel spring. This check valve is optimal in centrifugal, jet, and submersible pump systems.
 
Valve - Check (1/2") 309097215 $  9.41
WASHER OUTLET BOX VALVE
Removable valve. Finger tip control. Smooth 1/4 turn on/off ball valve action. Chrome plated brass body with brass stem. Color coded metal handles. All valves air tested and inspected. All valves installed in standard IPS female adapters for easy replacement. See more Washing Machine Valves.
 
Valve - Blue 261086 $15.11
Valve - Red 261080 $15.04
PUSH-FIT CHECK VALVE
For use with OD controlled copper, CPVC or PEX pipe. Rated to 200° F and 200 PSI. Corrosion resistant, DZR brass body. Designed for hydronic heating as well as potable water. Approved for underground installations.
 
Valve - Check (1/2") 272533 $24.85
Valve - Check (3/4") 272534 $29.30
LEAD FREE BRASS THREADED
BALL VALVE
This lead free ball valve is forged from bass and includes a lever handle with female connections on both ends. Perfect for residential and commercial use on water, air, steam, oil and gas applications. Designed for minimum pressure drops. Each valve is corrosion resistant. Forged brass body. Full port. Quarter-turn operation. Lead free design is suitable for all potable water supply installations. Use of pipe thread sealant or thread tape is recommended for installation. Threaded end connections conform to ANSI/ASME B1.20.1. ANSI/ASMEB16.33 for use with natural, manufactured, mixed and liquefied petroleum gases or propane gas and LP gas-air mixtures. Valve not intended to throttle the flow of water, use only in a fully opened or fully closed position.
 
Valve - Ball (1/2") 205817916 $14.26
FULL PORT CAST BRASS BALL VALVE
The NIBCO lead-free brass ball valve with threaded end connections provides bubble-tight shutoff. The valve's PTFE seats and lead free ball exhibit high corrosion resistance properties. The valve is ideal for hot/cold water and gas applications. Full port. Blowout-proof stem. IAPMO listed to NSF/ANSI-61-8, NSF/ANSI-372 CSA ANSI Z21.15 / CSA 9.1. CSA ASME B16.44: 5 psig and UPC-IGC-157. UL 1477 (YQNZ): compressed gas shutoff valves. UL 842 (MHKZ): manual valves 250 psi. UL subject 258 (VQGU): trim and drain valves. Valve pressure rating 600 psi/41.4 bar non-shock cold working pressure.
 
Valve - Ball (1/2") 290852 $13.97
Valve - Ball (3/4") 290854 $18.53
CPVC SLIP X SLIP BALL VALVE
Hot/cold water 100 psi at 180°F. Solvent ends comply with ASTM D 2846. Teflon seals. (See more CPVC Valves).
 
Valve - Ball (1/2") 26-8095 $ 5.78
Valve - Ball (3/4") 26-8100 $ 8.25
BALL VALVE (Push-Fit)
Valve - Ball (1/2") 98035 $13.26
Valve - Ball (3/4") 98036 $20.45
POLYMER BALL VALVE
Valve - Red  (1/2" x 1/2" FPT SWV) 28891 $ 4.82
Valve - Blue  (1/2" x 1/2" FPT SWV) 28890 $ 4.82
Valve - Black (1/2" x 1/2" FPT SWV) 28892 $ 4.82
PEX BARBED BALL VALVE
Valve - Ball (1/2") 41182 $ 6.50
Valve - Ball (3/4") 41183 $ 9.19