1-248-887-3187

Weekdays 9AM - 5PM EST

Mobile Home - Manufactured Housing - RV

×
Home / Appliances / Gas Components
  Also See:
Water Heater
Gas Valves
Furnace
Gas Valves

FIP x FIP GAS BALL VALVE
This tamper-proof gas appliance ball valve is made for appliances that use natural gas, manufactured mixed gases, liquefied petroleum, and LP gas-air mixtures. It comes with the following features: Made in Italy. Forged brass construction. Its connections are FIP x FIP. Double O-ring stem seal. Teflon seats. Larger port diameter. Red full lever handle the valve is Certified at 1/2 psi at the appliance. Certified at 5 psi for indoor piping systems. UL-Listed (Subject 258)
 
Valve - Ball (1/2") 492008 $  9.10
Valve - Ball (3/4") 492009 $10.62
FIP x FLARE GAS BALL VALVE
Forged brass construction. Chrome plated brass ball. Double o-ring stem seal. Teflon seats. Lever handle. Tamper proof. Certified 1/2 psi at the appliance. Certified 5 psi for indoor piping systems. For use with natural, manufactured mixed gases, liquified petroleum and LP gas-air mixtures.
 
Valve - Ball (1/2" x 3/8") 492011 $12.45
Valve - Ball (1/2" x 1/2") 492012 $12.45
FIP x FIP GAS BALL VALVE
One piece forged brass body. Chrome plated brass ball. Teflon seals. Threaded ends meet ANSI B1.20.1. Tee handle is aluminum. Rated 1/2 psi at the appliance. For use with natural, manufactured mixed gases, liquified petroleum and LP air-gas mixture.
 
Valve - Ball (1/2") 491004 $11.39
Valve - Ball (3/4") 491005 $20.05
SAFETY STOP GAS BALL VALVE
Patent pending spring loaded handle which automatically locks in closed position for safety - handle must be pushed down while simultaneously turned to open. One piece forged brass body. Chrome plated solid brass ball. Nitrile Butadiene Rubber (NBR) seats and dual o-ring. Threaded ends meet ANSI 1.20.1 and flare ends meet ANSI 1.1. Coated aluminum T-handle. Rated for 200 psig. Certified 5 psig for house piping systems. UL approval only for threaded x threaded valves. For use with natural, manufactured mixed gases, liquified petroleum and LP gas-air mixtures.
 
Valve - Ball (3/4" FIP) 492131 $22.03
PIPE JOINT COMPOUND
Oatey Great White Pipe Joint Compound With PTFE is a non-hardening, non-separating, non-toxic paste that lubricates and seals all threaded joints.
 
Compound - Joint (1 oz. tube) 27-6615 $ 5.03
PIPE JOINT COMPOUND
Black Swan Pipe Joint Compound - For Use Primarily On Metal Pipes. Can Be Used On Plastic Pipes But Not Ideal Due To Petroleum Component.
 
Compound - Joint (2 oz. tube) 27-6605 $ 1.87
Compound - Joint (1/2 Pint) 27-6610 $ 4.25
YELLOW COATED-STAINLESS STEEL
GAS CONNECTORS
This 1/2 in. OD, 3/8 in. ID, durable, corrosion resistant stainless steel gas connector is configured with 1/2 in. MIP x 1/2 in. FIP adapters. Designed with safety in mind, this CSA approved gas connector is yellow coated. The yellow coating is an industry recognized color for gas lines and provides extra corrosion protection from accidental contact with harmful chemicals that may be found in household products. It is commonly used for the installation of home appliances such as gas dryers and water heaters. Designed and certified by CSA for indoor and outdoor use. 304 stainless steel. 100 % factory leak tested.
 
Lg Connections # $
12" 1/2" MNPT x 1/2" FNPT 525011 $14.80
18" 1/2" MNPT x 1/2" MNPT 525008 $18.96
1/2" MNPT x 1/2" FNPT 525012 $16.72
24" 1/2" MNPT x 1/2" MNPT 525009 $19.49
1/2" MNPT x 1/2" FNPT 525013 $19.23
36" 1/2" MIP x 1/2" MIP 525010 $27.57
1/2" MNPT x 1/2" FNPT 525014 $22.54
48" 1/2" MNPT x 1/2" FNPT 525015 $27.20
YELLOW COATED-STAINLESS STEEL
GAS CONNECTORS
This 5/8 in. OD, 1/2 in. ID, durable, corrosion-resistant stainless steel gas connector is configured with 1/2 in. FIP x 1/2 in. FIP adapters. Designed with safety in mind, this CSA approved gas connector is yellow coated. The yellow coating is an industry recognized color for gas lines and provides extra corrosion protection from accidental contact with harmful chemicals that may be found in household products. It is commonly used for the installation of home appliances such as gas ranges and furnaces. Designed and certified by CSA for indoor and outdoor use. 304 stainless steel. 100 % factory leak tested.
 
Lg Connections # $
24" 1/2" FNPT x 1/2" FNPT 525016 $20.77
1/2" MNPT x 1/2" MNPT 525024 $20.14
1/2" MNPT x 1/2" FNPT 525028 $20.56
30" 1/2" FNPT x 1/2" MNPT 525017 $18.99
36" 1/2" FNPT x 1/2" FNPT 525018 $25.78
1/2" MIP x 1/2" MIP 525025 $21.10
1/2" MNPT x 1/2" FNPT 525029 $22.10
48" 1/2" FNPT x 1/2" FNPT 525019 $27.25
1/2" MNPT x 1/2" MNPT 525026 $29.55
1/2" MIP x 1/2" FIP 525030 $29.28
60" 1/2" MNPT x 1/2" MNPT 525027 $34.45
1/2" MNPT x 1/2" FNPT 525031 $34.56
72" 1/2" MIP x 1/2" FIP 525032 $39.04
GAS APPLIANCE CONNECTORS
This 5/8 in. OD, 1/2 in. ID, durable, corrosion-resistant stainless steel gas connector is configured with 1/2 in. FIP x 1/2 in. FIP adapters. Designed with safety in mind, this CSA approved gas connector is commonly used for the installation of home appliances such as gas ranges and gas furnaces. This gas connector is 100 % leak tested. Designed and certified by CSA for indoor and outdoor use. Durable and corrosion resistant. 304 stainless steel.
 
1/2" FNPT x 1/2" FNPT
Connector - 24" 501506 $20.18
Connector - 36" 501507 $21.36
Connector - 48" 501508 $29.63
Connector - 60" 501509 $32.18
Connector - 72" 501510 $37.28
STAINLESS STEEL
GAS APPLIANCE CONNECTOR
This 1/2 in. OD, 3/8 in. ID, durable, corrosion resistant stainless steel gas connector is configured with 1/2 in. MIP x 1/2 in. FIP adapters and is 18 in. L. Designed with safety in mind, this CSA approved gas connector is commonly used for the installation of home appliances such as gas dryers and water heaters. This gas connector is 100 % leak tested. Designed and certified by CSA for indoor and outdoor use. Durable and corrosion resistant. 304 stainless steel
 
Connector - 18" 501011 $16.78
Connector - 24" 501012 $18.40
Connector - 36" 501013 $22.02
Connector - 48" 501014 $23.82
Connector - 60" 501022 $34.50
STAINLESS STEEL GAS CONNECTOR
This 5/8 in. OD, 1/2 in. ID, durable, corrosion resistant stainless steel gas connector is configured with 1/2 in. MIP x 1/2 in. FIP adapters and is 24 in. L. Designed with safety in mind, this CSA approved gas connector is commonly used for the installation of home appliances such as gas ranges and furnaces. This gas connector is 100 % leak tested. Designed and certified by CSA for indoor and outdoor use. 304 stainless steel.
 
1/2" FNPT x 1/2" MNPT
Connector - 24" 501005 $19.55
Connector - 36" 501006 $20.82
Connector - 48" 501007 $25.71
Connector - 60" 501060 $32.06
BLACK EPOXY COATED
STAINLESS STEEL GAS HEARTH
CONNECTOR
This 1/2 in. OD, 3/8 in. ID, durable, corrosion resistant stainless steel gas connector is configured with 1/2 in. MIP x 1/2 in. FIP adapters. L. With a durable pre-applied high temperature black coating, the gas connector provides a low-visibility gas connector installation. Designed with safety in mind, this CSA approved gas connector is commonly used for the installation of home appliances such as gas log sets, fireplace inserts, and freestanding fireplaces. Designed and certified by CSA for indoor and outdoor use. 304 stainless steel. 100 % factory leak tested
 
1/2" MNPT x 1/2" FNPT
Connector - 18" 501097 $18.10
Connector - 24" 501098 $21.23
Connector - 36" 501104 $24.90
FLEXIBLE GAS CONNECTOR
1" Super-Safe Stainless Steel Gas Connectors. Dormont is the most trusted name in gas connectors. AGA listed for both outdoor and indoor use. Annealed 304 stainless steel. PVC coated. 1" OD (3/4" ID) with 3/4" FPT x 3/4" MPT.
 
Connector - 24" 250812 $104.74
Connector - 30" 250814 $123.30
Connector - 36" 250811 $133.76

    Contact MHD


  • 2221 E. Highland Rd

  • Highland, MI 48356

  • (248) 887-3187

PRICES SUBJECT TO CHANGE WITHOUT NOTICE.

@Copyright 2023 - Mobile Home Depot, Inc. - All Rights Reserved