1-248-887-3187

Weekdays 9AM - 5PM EST

Mobile Home - Manufactured Housing

×
Exterior Anchors & TieDowns Doors & Windows Coatings & Sealants Appliance Tools & Hardware Interior Trim Vents & Registers Plumbing Electrical Transport & Safety Heating & Cooling
Home / Electrical / Conduit
90° PVC PLAIN END ELBOW
Carlon PVC elbows are for use in a non-metallic PVC conduit run when directional change is necessary. Manufactured from durable PVC, the elbows are ideal for both indoor and outdoor applications. They will not rust or corrode which is especially important in outdoor applications. Designed for above and below-ground applications. Use with schedule 40 rigid non-metallic conduit. Resists rust and corrosion. Listed for use in exposed and outdoor usage.
 
Elbow - PVC standard radius (3/4") 626711 $ 1.33
Elbow - PVC standard radius (1/2") 626704 $ 1.15
45° PVC PLAIN END ELBOW
Carlon PVC elbows are for use in a non-metallic PVC conduit run when directional change is necessary. Manufactured from durable PVC, the elbows are ideal for both indoor and outdoor applications. They will not rust or corrode which is especially important in outdoor applications. Designed for above and below-ground applications. Use with schedule 40 rigid non-metallic conduit. Resists rust and corrosion. Listed for use in exposed and outdoor usage. .
 
Elbow - PVC standard radius (3/4") 663178 $ 1.36
Elbow - PVC standard radius (1/2") 663177 $ 1.12
CONDUIT MALE ADAPTER
PVC non-metallic fittings can be used with Sch. 40 and Sch. 80 RIGID non-metallic conduit (RNC). Designed for use above ground and underground as described in the NEC. Fittings insure raceway integrity. Unlike metallic systems, non-metallic fittings are lighter, can be installed in less time and are easily fabricated on the job. Fittings are nonconductive assuring a safe system. Resistant to sunlight and listed for exposed or outdoor usage, Non-metallic PVC fittings are durable and will not rust or corrode. For use with schedule 40 and 80 conduit. UL E23018. Material PVC. Color gray.
 
Adapter - PVC male (3/4") 626263 $ 1.14
Adapter - PVC male (1/2") 626256 $   .38
PVC CONDUIT COUPLING
1/2 in. PVC non-metallic coupling can be used with Sch. 40 and Sch. 80 RIGID non-metallic conduit (RNC). Designed for use above ground and underground as described in the NEC. fittings ensure raceway integrity. Unlike metallic systems, non-metallic fittings are lighter, can be installed in less time and are easily fabricated on the job. Fittings are nonconductive assuring a safe system. Resistant to sunlight and listed for exposed or outdoor usage, Non-metallic PVC fittings are durable and will not rust or corrode. Can be used to join Rigid Non-Metallic Conduit (RNC). Compatible with Sch. 40 and Sch. 80 RIGID non-metallic conduit (RNC). For use in aboveground and underground applications as well as exposed outdoor usage. Durable PVC construction means no rusting or corroding. Weighing less than metallic systems means more efficient and quicker installation time. UL Listed.
 
Coupling - PVC (3/4") 626151 $ .56
Coupling - PVC (1/2") 626144 $ .46
PVC FEMALE ADAPTER
The Female Adapter is designed for use with RIGID non-metallic conduit (RNC). The adapter is crafted with PVC, works indoors and outdoors and is CSA and UL Listed to help ensure safety. It has female threads on one end, socket end on the other. For use indoors and outdoors. Compatible with RNC. PVC construction. CSA and UL Listed for safety.
 
Adapter - Female (3/4") 626249 $ .56
Adapter - Female (1/2") 626242 $ .29
ELECTRICAL PVC CEMENT
Electrical PVC Cement. For Power and Communications Duct and Conduit Through 6" Diameter. Clear, Medium Bodied and Fast Setting. PVC cement. Used for power and communications duct and conduit through 6 in. Dia. Medium Bodied. Clear. Fast setting.
 
Cement - PVC 451062 $14.21
Cement - PVC (1 Qt.) 451063 $20.08
PVC TYPE-LB CONDUIT BODY
The non-conductive Non-Metallic Type LB Conduit Body has a textured lid and a foam in-place gasket. Suitable for indoor and outdoor use, this conduit body hub is made of unthreaded PVC. Item is UL and CSA listed for safety. Compatible with rigid non-metallic conduit (RNC). Made of non-corrosive PVC. Maximum operating temperature of 120°F. Can be used for indoor and outdoor applications. UL and CSA listed.
 
Body - Conduit (3/4") 626011 $ 4.06
Body - Conduit (1/2") 626004 $ 3.79
PVC ACCESS PULL
The 1/2 in. and 3/4 in. Access Pull Elbow enables the pulling of wires through a wall to be directed in 2 separate directions. This pull elbow is compatible with rigid non-metallic conduit. Access pull point for cable in tight radius. Material PVC. Color in gray. Schedule 40 and 80 conduit. UL E23018.
 
Elbow - Access pull (3/4") 626045 $ 5.62
Elbow - Access pull (1/2") 626043 $ 5.78
PVC CONDUIT
Conduit - Pipe (3/4" x 10 ft.) 220441 $ 5.38
NON-METALLIC LIQUIDTITE FITTINGS
For use with non-metallic liquid tight conduit, Type B. Provides smooth connection, no sharp edges to strip wire. Wiring easily pulls through. Plastic material.
 
Elbow - Liquidtite (3/4") 220434 $ 5.89
Elbow - Liquidtite (1/2") 220431 $ 3.82
Connector - Liquidtite (3/4") 220433 $ 1.89
Connector - Liquidtite (1/2") 220430 $ 1.89
RIGID CONDUIT LOCKNUTS
Use the Conduit Locknuts to secure RIGID and IMC conduit and various threaded fittings to steel outlet boxes and other metal enclosures. Zinc plated for corrosion resistance. These conduit locknuts can be used for outdoor applications. Indoor and outdoor use. Zinc-plated steel for corrosion resistance. Exceeds UL 514B safety requirements. Designed to cut through protective coatings on boxes and enclosures to assure ground continuity.
 
Locknut - Conduit (3/4")   4-Pack 100111071 $ 1.73
Locknut - Conduit (1/2") 20-Pack 100186613 $ 4.64
PVC CONDUIT CLAMP
PVC non-metallic conduit clamps can be used with Sch. 40 and Sch. 80 rigid non-metallic conduit (RNC). Clamps allow conduit to expand and contract eliminating the temperature-related bowing and flexing common with conduit. Unlike metallic systems, on-metallic clamps are lighter, can be installed in less time and are easily fabricated on the job. Clamps are nonconductive assuring a safe system. Resistant to sunlight and listed for exposed or outdoor usage, Non-metallic PVC conduit clamps are durable and will not rust or corrode. Used to support rigid non-metallic conduit (RNC) and rigid steel conduit. UV inhibited for use in direct sunlight. Weighing less than metallic systems means more efficient and quicker installation time. UL listed. Some clamp applications require 2 screws, 2 nuts, and 2 washers.
 
Clamp - Plastic (1/2") 25 pk 203701806 $ 7.14
Clamp - Plastic (3/4") 20 pk 203701808 $ 7.73
Clamp - Plastic (1")      5 pk 202077322 $ 2.37