CEMENTS & GLUES

Black Swan Pipe Joint Compound - For Use Primarily On Metal Pipes. Can Be Used On Plastic Pipes But Not Ideal Due To Petroleum Component.

The Oatey 14 oz. Plumber's Putty is an easy-to-mold setting compound designed for use with stainless-steel sealing applications such as frames, faucets and strainer baskets. Not for use on plastic, marble, granite, limestone or other dimensional stones.

Medium-bodied black cement for use on ABS pipe and fittings up to 6" in diameter. For all pressure and non-pressure applications.

Medium-bodied green-colored cement for use in joining ABS to PVC in non-pressure transition joints. All schedules up to 6" dia. pipe and fittings. Recommended application temperature 40°F to 110°F. Meets ASTM D-3138.

Heavy-bodied clear cement for use on ABS, PVC, and CPVC pipe and fittings up to 12" in diameter. Flows freely and provides a thick layer. Helps fill gaps in larger diameter pipe and joints.

Medium-bodied clear cement for use on PVC pipe and fittings up to 6" dia. formulated for fast initial set up at temperatures down to -5°F to 100°F Sch. 40 and Sch. 80. Non-pressure, DWV, up through 4" diameter, no primer needed where local codes permit.

Electrical PVC Cement. For Power and Communications Duct and Conduit Through 6" Diameter. Clear, Medium Bodied and Fast Setting. PVC cement. Used for power and communications duct and conduit through 6 in. Dia. Medium Bodied. Clear. Fast setting.

Oatey's one-step cement for CPVC is specially formulated to bond with FlowGuard Gold CPVC where all purpose cements will not. Needs no primer, faster cure time than regular cements, low VOC, meets ASTM D-2846 & F-4 93. Exceeds environmental requirements.

Regular-bodied clear cement for PVC pipe and fittings up to 3" dia. Use on Schedule 40 and Schedule 80 potable water pressure pipe, gas, conduit, drain waste and vent pipe. Flows freely, sets-up quickly. Apply at temperatures 40° - 90° F.

Fast-setting blue PVC cement for solvent welding under damp or wet conditions; effective when quick pressurization is needed. Ideal for sprinkler or pool installations.

A clear cleaner recommended for use on ABS, PVC and CPVC pipe and fittings, all schedules and diameters. A fast-acting cleaner to remove surface dirt, grease and grime. Flows freely and evaporates quickly. Apply at temperatures 40°F to 100°F.

All purpose primer/cleaner for PVC/CPVC pipe and fittings. Purple tint tells you primer has been used. Removes surface dirt, grease and grime; also softens pipe surface to allow for a fast and permanent solvent weld. Flows freely, evaporates quickly.

1 oz. tube

Web spray pattern. Bonds on contact. Precise spray control. Excellent balance of heat & cold resistance. Soft glue line. Aggresive tack - increases production speed. Excellent bond strength - Reduce reject rates.

Works well on bottom board, vinyl tops, metal or vinyl trim, styrofoam, foam rubber, glass, plastics and much more. Gives high solids, water-resistant bonds offering quick tack, non-wrinkling and flexibility.