Water Heater Components

Replace your RV 1/2" water heater drain plug quickly and easily with this convenient 2-pack. Drain plug has standard 1/2-14 NPT pipe threads. Use 3-5 wraps of Teflon tape to seal threads to prevent leaking.

RV Water Heater Drain Plug Kit helps you easily remove and replace your RV's water heater drain plugs. The included wrench fits 7/8" and 15/16" drain plugs.

Fits all Atwood water heaters. 1/2" (2 Pack)

​Fits Wh-6 & Wh-9 Models.

Replace water heater valves with a sturdy, easily-installed durable brass replacement.

​This is a Single Universal Water Heater Thermostat, Apcom Style. It meets original specification lengths for State, Reliance, Kenmore, Bradford White, Whirlpool. Energy efficient range setting adjustable from 110 degree F 160 degree F.

The Camco Plastic Upper Thermostat is ideal for use with electric residential water heaters that have both an upper and lower heating element. There is a built-in safety switch to prevent over-heating. Instructions and wiring diagram are included.

140 Degree. Eco/thermostat replacement for all 12-V DSI water heaters.

​This lower thermostat is to be used with an electric residential tank water heater that has both an upper and lower heating element. It has an adjustable heat setting. It is used in the lower thermostat position to control heat to the lower heating elemen

COVER THERMOSTAT LIMIT SWITCH For SW DE SERIES (2-HOLES) REPLACES 090562

Chrome-plated Element Socket fits standard 1/2" socket drive to make easy work of replacing screw-in water heater elements.

Remove and replace residential screw-in water heater elements quickly and easily with Camco's Water Heater Element Wrench. This 5" long zinc-plated wrench goes where other wrenches can't.

High Watt Density heating element; UL Listed; Easy to install.

1500W 120V HWD. Replace the heating element in your RV water heater with a UL recognized HWD replacement kit. Detailed instructions included.

Compatibility SW4/6/10/12/16 D, DE, DEL, SW6/10/12/16 DEM. Superseded from part number 520789. WITH GASKET / SCREW IN. Wattage 1440 Watts. Voltage Rating 120 Volts. 1,440 Watt Element Recovers An Additional 6.0 Gallons Per Hour At Campsites.

RV Magnesium Anode Rod extends the life of a water heater by attracting corrosive elements in the water, protecting the tank and elements from corrosion. This Anode Rod fits Atwood water heaters. Patented. 0.5" diameter x 4.5" long.

RV Aluminum Anode Rod extends the life of a water heater by attracting corrosive elements in the water, protecting the tank and elements from corrosion.

RV Anode Rod is a sacrificial rod that extends the life of your water heater tank by absorbing the corrosion causing particles in the water. As a result, the water corrodes the rod rather than your water heater tank.

Compatibility  Suburban Aluminum Water Heaters. Length (IN)  9 Inch, Thread Size 3/4 Inch. Material  Magnesium. Absorbs The Electrolytical Action - Just Like Your Water Heater At Home.

Compatibility Suburban Aluminum Water Heaters. Length (IN) 9 Inch, Thread Size 3/4 Inch. Material Magnesium. Absorbs The Electrolytical Action - Just Like Your Water Heater At Home.

Ring & Gasket Kit to suit all Atwood Water Heaters EXCEPT G610-3E and GH610-3E.

Metal. Spring-loaded latch used to secure exterior water heater door. Genuine OEM. Package or 2.

RV Camloc Fasteners replace broken door latches quickly and easily. The camloc replaces the water heater door latch assembly or gas bottle cover access door latch. (2 Pk).

• Stands Up to the Elements and Frequent Use • With Corrosion Resistant Steel Finished in a Tough, High-Solids Baked Enamel for Extra Chip Resistance

6 Gal. PW (was 91502)

White

For all Atwood water heater doors.

Fits all Atwood water heaters w/pilot ignition.

w/Fuse Gas Only.

Fits all Atwood water heaters. 150 PSI

150-PSI, 200-Degree (F), furnished with test lever, 4" long thermostat for installation in hot outlet line.

150-PSI, 200-Degree (F), furnished with test lever, 4" long thermostat for installation in hot outlet line.

DSI G6A-4E GH6-4E GH6-7E.

Water Heater Burner Assembly with Orifice. Works on Models: All 6 Gallon SW Series After Serial Number 953401118. All 10 Gallon SW Series After Serial Number 953601021.

Manifold Outlet - DSI (SW6D & 10D Models) After Serial #953401118.

G6A GC10 GCH-4E 6E 7E All Models (5CS).

90061 (10CS)

This Suburban Water Heater Control Board fits the following Suburban water heaters above serial number 953900766, SW5D, SW6DE, SW6DEL, SW6DEM, SW10D, SW10DE, SW10DEL, SW10DEM, SW12D, SW12DE, SW12DEL, SW12DEM, SW16D, SW16DE, SW16DEL, SW16DEM

Lead Free! US Made! Western Leisure Products Lightning Rod Electric RV Water Heater Kits are add-on 110 volt electric kits for heating water in a gas only water heater. Each kit will fit Atwood or Suburban 6-gallon or 10-gallon water heaters.

DSI Gas Valve SW Series Suburban Water Heaters - This gas valve for DSI, SW Series Suburban Water Heaters has a 3/8 inch NPT Inlet x 1/4 inch Loxit Outlet

Applicable models: SAW6D (All Serial Numbers), SAW6DE (All Serial Numbers), SAW6DEL (All Serial Numbers), SW4D (Serial Numbers Above 164810695), SW4DE (All Serial Numbers), SW4DEL (All Serial Numbers), SW6D (Serial Numbers Above 164513432).

T-Stat/Switch assembly replacement part for DSI (Direct Spark Ignition) SW Series Suburban water heaters.

T-Stat/Switch assembly replacement part for DSI (Direct Spark Ignition) Suburban water heaters.

For D, DE, SAW6D and SAW6DE Models. Switch operates LP gas heating only. The electric element for DE models is controlled with a dedicated ON/OFF switch located on the heater housing.

Gas and Electric combo switch for 94002SP water heater.

Water Heater Loxit Nut, 1/4 Inch. Works on Models: All 6 Gallon SW Series After Serial #953401118. All 10 Gallon SW Series After Serial #953601021.

DSI electrode wire.

Flush accumulated sediment from your water heater tank to prevent corrosion, restore heating efficiency and extend water heater life.

Use the tank saver; all it takes ia 10 minutes twice a year! All RV water have trapped sediments which shorten the life of the heater. Sediment build-up also decreases the water capacity of the heater.

Fits all "SW" Model water heaters.

​6 Gallon, Black or White, conversion Kit For replacing Legacy Atwood/Dometic Water Heaters with cut-out: 12-1/2" x 16-1/2" (H x W) with a Dometic water heater model Wh-6 or Wh-9 (Includes adapter plates).

Mixing Valve for XT Series Water Heaters. Replacement for single tube mixing valve assemblies (2005 and newer). If water heater has a mixing valve that has two tubes (2004-2005) use replacement kit part# 92690.