1-248-887-3187

Weekdays 9AM - 5PM EST

Mobile Home - Manufactured Housing - RV

×
Home / Exterior / RV Cargo
TIRE CARRIERS (Stromberg Carlson)
These Rigid and Folding Tire Carriers by Stromberg are designed for your tire carrying needs. Our models are universal in design, suited to carry 15″ – 16″ travel trailer tires on your 4″ square bumper. All hardware and U-bolts are included.
 
Carrier - Rigid tire TR-1 $34.91
Carrier - Folding tire TR-2 $37.63
U-Bolt Kit - Replacement 2200 $10.41
BUMPER HITCH ADAPTER
(Stromberg Carlson)
Our Bumper Receiver can be used with most hitch mounted accessories – bike racks or carriers. Fits 4″ square bumpers. Provides 2” receiver opening. Supports 200 lbs (always default to your bumper rating capacity). Heavy steel construction and zinc plated hardware. Cannot be used for towing.
 
Adapter - Bumper hitch BA-100 $47.16
ADJUSTABLE ACCESSORY HITCH
(Stromberg Carlson)
The CC-300 Adjustable Accessory Hitch provides the following: 2” Hitch for Travel Trailers and Fifth Wheels. Bolts on as Class I or welds on as Class II hitch to frame. Can mount to side wall of frame or horizontal wall of “C” channel or “I” Beam with angled hardware. For use with bike racks, cargo carriers and other accessories. Not to be used pulling cars or boats if bolted in Class 1 Configuration.
 
Hitch - Adjustable accessory CC-300 $239.66
CARGO CADDY
(Stromberg Carlson)
Whether your travels include a grill, cooler, dry box or simply more gear than you can accommodate, this Stromberg Carlson Cargo Caddy is the hitch mounted back porch you’ve always wanted. Platform inside dimensions are 23” x 60″. Spacing from hitch pin to back of tray is 7.5″. Supports 500 lbs of cargo. Expanded metal floor to drain water. Powder coated to resist rust. Tie down holes are provided. Fits in a 2″ receiver. Bike Rack accessory available (CC-125).
 
Caddy - Cargo CC-100 $110.16
CARGO CADDY BIKE RACK
(Stromberg Carlson)
Love your Cargo Caddy (CC-100) but need a secure way to attach your bikes? The Stromberg Carlson Cargo Caddy Bike Rack provides just that! Adapts your Cargo Caddy (CC-100) into a 2 bike carrier. Accommodates tire widths up to 2.25″. 4 wheel brackets, applicable hardware and 2 tie down straps included. Cradles stand up 11.5″ from the carrier surface.
 
Rack - Cargo Caddy Bike CC-125 $40.16
LP BOTTLE RACK  (Stromberg Carlson)
This Bottle Rack by Stromberg is designed to safely hold your 20 lb LP tanks. Wall mounting. Steel design. 20lb tank capacity. Interior or exterior mount.
 
Rack - Single LP tank 2020-JR $19.16
BIKE BUNK  (Stromberg Carlson)
A raised receiver on the “A” frame is the perfect place to put your bikes. The Bike Bunk by Stromberg allows any RV approved bike rack designed for a 2″ receiver to fit. Your application will be determined by the turning radius and positioning of the rack. All steel design supports up to 100 lbs. Critical Dimensions: 33.5″ from the top of your A-frame to the top of the Bike Bunk cross tube, 29” from the top of your A-frame to the bottom of the receiver tube on the cross tube. Due to the bent design on the vertical posts, lower pockets can be mounted on your A-frame at widths varying from 14″ to 55″. Max A-frame bar height of 6″. If you have propane tanks installed and the bike bunk cross bar is located above them, one of three things can be done to allow you to remove your tanks for refill or to access valves without removing the cross tube. Replace your existing cover with a soft vinyl cover, allowing access to your LP valves or to remove LP tanks without having to remove the cross bar. Replace your existing cover with a flip-top hard plastic cover to access your LP valves. You will need to remove the cross bar to remove cover and refill LP tanks. Leave the tank cover off for direct access to your LP tanks. If you have an Airstream, please note the clearance does not accommodate the 30 gal covered LP tanks. Bike rack not included. See our Post Mount and Platform Mount Bike Racks.
 
Bunk - Trailer tounge Bike CC-275 $279.91
TRAILER TRAY  (Stromberg Carlson)
The first trailer tongue cargo carrying system! Adjustable to fit most “A” frame trailers on the road today; this tray provides additional storage in the softest riding area of your trailer. Your application will be determined by tow vehicle turning radius and positioning of the tray. Supports up to 300 lbs. Use it for generators, coolers, compressors, welders, wood boxes and much more! Appx. 30-5/8” from top of A-frame to top of tray. Appx. 29-1/2” from top of A-frame to bottom of tray. This distance is designed to accommodate up to a 30 lb standard LP tank. Due to bent design on vertical tubes, tray brackets can be mounted on your A-frame at widths varying from 14″ to 55″ (Note: you may need to modify the front support plate to accommodate increased width mounting). Please note, if you have propane tanks installed at the intended tray location, one of three things can be done to allow you to remove your tanks for refill or to access valves without removing the tray. Replace your existing cover with a soft vinyl cover, allowing access to your LP valves or to remove LP tanks without having to remove the cross bar. Replace your existing cover with a flip-top hard plastic cover to access your LP valves. You will need to remove the cross bar to remove cover and refill LP tanks. Leave the tank cover off for direct access to your LP tanks.
 
Tray - Trailer tounge cargo CC-255 $244.91
POST MOUNT BIKE RACK  (Stromberg Carlson)
The Model BC-102 2-bike, post mount carrier can be used on Motorhomes, Travel Trailers and Fifth Wheels. While we recommend they be used with our Bike Bunk Model CC-275, they will also work in any of our accessory hitches. 60 lb weight capacity. Model BC-102 – 2-bike post mount carrier.
 
Rack - 2-Bike post mount BC-102 $97.13
POST MOUNT BIKE RACK
(Stromberg Carlson)
The Model BC-104 4-bike, post mount carrier can be used on Motorhomes, Travel Trailers and Fifth Wheels. While we recommend they be used with our Bike Bunk Model CC-275, they will also work in any of our accessory hitches. 120 lb weight capacity. Model BC-104 – 4-bike post mount carrier.
 
Rack - 4-Bike post mount BC-104 $116.38
POST MOUNT BIKE RACK
(Stromberg Carlson)
The Model BC-108 4-bike, post mount carrier can be used on Motorhomes, Travel Trailers and Fifth Wheels. While we recommend they be used with our Bike Bunk Model CC-275, they will also work in any of our accessory hitches. The Model BC-108 bike rack features an adapter sleeve to accommodate 1-1/4″ and 2″ hitch receivers, as well as an anti-rattle pin to reduce vibration during travel. 120 lb weight capacity. Model BC-108 – 4-bike post mount carrier.
 
Rack - 4-Bike post mount BC-108 $118.13
PLATFORM MOUNT BIKE RACK
(Stromberg Carlson)
The Stromberg Carlson BC-202BA 2-bike platform mount carrier can be used on Motorhomes, Travel Trailers and Fifth Wheels. Two bike carrier. Fits 4” bumpers or 2″ receivers. Bumper Accessory Hitch Included. Wheel Mounts Adjust to Any Size Frame. Weight Capacity 80 lbs.
 
Rack - 2-Bike platform mount BC-202BA $227.41
Cradle Set - Fat tire (2 Cradles) BC-2FT $ 51.63
PLATFORM MOUNT BIKE RACK
(Stromberg Carlson)
The Stromberg Carlson BC-204 4-bike platform mount carrier can be used with 2″ hitch receivers. Four Bike Carrier. Fits 2” Receiver. Vertical Post Tilts Down for Access to Vehicle. Wheel Mounts Adjust to Any Size Frame. Weight Capacity 160 lbs. Not for bumper or hitch use behind fifth wheel or travel trailer.
 
Rack - 4-Bike platform mount BC-204 $349.91
Cradle Set - Fat tire (2 Cradles) BC-2FT $ 51.63