1-248-887-3187

Wholesale

Weekdays 9AM - 5PM EST

Mobile Home - Manufactured Housing - RV

×
Exterior Anchors & TieDowns Doors & Windows Coatings & Sealants Appliance Tools & Hardware Interior Trim Vents & Registers Plumbing Electrical Transport & Safety Heating & Cooling
Home / Heating & Cooling / Miller Furnaces
CMF2 Series
Oil and Gas Furnace
The CMF2 Series Furnace is a classic and time honored design. The CMF2 is a versatile and reliable product used in Manufactured Housing and and other applications such as space heating, garages, hunting camps or single story residential structures. The new model CMF2 Furnace incorporates a multi-speed blower and multi-fired burner. Classic design countered with new technology make the new CMF2 today's choice for a multi-application fossil fuel heating appliance. Also See Breakdown Illustration.
 
• Three-speed, custom fit and painted blower for efficient, quiet operation.
• Multi-firing technology in gas and oil burner.
• Resized auxiliary limit switch eliminates nuisance cycling.
• Beckett oil burners are standard equipment.
• Classic 18" width dimension for those tight replacement jobs.
• MA 100, MA 200, and CB 200 bases for versatility in applications.
 
Heat Only Furnace - Standard Flue
Vent size 4"
Model Burner Type Btu/h
Input
Btu/h
Output
Wght. W x D x H Mfg. # Part # Price
CMF2 80PG Gas Gun 80,000 64,000 183 18" x 24-1/4" x 57" 904515 238000  
CMF2 80PO Oil Gun 80,000 64,000 167 18" x 24-1/4" x 57" 904516 238001  

M1 Series Furnace
M1M* Hot Surface Ignition
M1B* Gas Gun
The M1 Series furnace is designed for all sizes of manufactured and modular homes. These units incorporate high efficiency, reliablity, and low maintenance. Units may also be installed free standing in a utility room or enclosed in an alcove or closet. M1 Series furnaces are available in A/C adaptable or A/C ready, with or without coil cavity box, multiple blower combinations for cooling requirements, and many burner options. Also see Breakdown Illustration (M1M), or Breakdown Illustration (M1B)
 
• Sealed Combustion System: Vents exhaust gas directly outdoors and draws in 100% outside air for the burner.
• Easy Open Pawl Latch: Secures the door firmly for transit, yet allows easy removal for access.
• Choice of Air Conditioning Options: From 2 to 5 tons A/C ready.
• Large, Effective Air Filter: Room air is cleaner with this permanent washable filter.
• High Efficiency Drum Heat Exchanger: Delivers optimum heat transfer with low air resistance.
• Appliance Quality Door: Protects against rust and other corrosion. Baked enamel finish allows for easy cleaning.
• Fully Insulated Cabinet: Insures minimized heat loss and quiet operation.
• Reliable Burner: With uniform flame pattern extends life of heat exchanger.
 
Forced Draft Gas
56,000 to 90,000 Btu/h, Heating, A/C Relay (no coil cabinet)
Model Burner Type Output
Btu/h
AFUE Wght. W x D x H Mfg. # Part # Price
M1MB-077AAW Hot Sur. Ign. 62,000 80.0 149 19-3/4" x 23-3/4" x 56" 903230 233015  
M1MB-090AAW Hot Sur. Ign. 72,000 80.0 151 19-3/4" x 23-3/4" x 56" 903231 233016  

56,000 to 90,000 Btu/h, With Coil Cabinet & A/C Ready up to 3 Tons
Model Burner Type Output
Btu/h
AFUE Wght. W x D x H Mfg. # Part # Price
M1MB-056ABW Hot Sur. Ign. 46,000 80+ 167 19-3/4" x 23-3/4" x 76" 903236 233005  
M1MB-070ABW Hot Sur. Ign. 57,000 80+ 168 19-3/4" x 23-3/4" x 76" 903237 233006  
M1MB-077ABW Hot Sur. Ign. 62,000 80+ 171 19-3/4" x 23-3/4" x 76" 903238 233007  
M1MB-090ABW Hot Sur. Ign. 72,000 80+ 166 19-3/4" x 23-3/4" x 76" 903239 233008  

56,000 to 90,000 Btu/h, A/C Ready up to 3 Tons (no coil cabinet)
Model Burner Type Output
Btu/h
AFUE Wght. W x D x H Mfg. # Part # Price
M1MB-056AAW Hot Sur. Ign. 46,000 80+ 152 19-3/4" x 23-3/4" x 56" 903228 233013  
M1MB-070AAW Hot Sur. Ign. 57,000 80+ 153 19-3/4" x 23-3/4" x 56" 903229 233014  

56,000 to 90,000 Btu/h, With Coil Cabinet & A/C Ready up to 4 Tons
Model Burner Type Output
Btu/h
AFUE Wght. W x D x H Mfg. # Part # Price
M1MC-056ABW Hot Sur. Ign. 46,000 80 171 19-3/4" x 23-3/4" x 76" 903240 232985  
M1MC-070ABW Hot Sur. Ign. 57,000 80 172 19-3/4" x 23-3/4" x 76" 903241 232986  
M1MC-077ABW Hot Sur. Ign. 62,000 80 171 19-3/4" x 23-3/4" x 76" 903240 232987  
M1MC-090ABW Hot Sur. Ign. 72,000 80 171 19-3/4" x 23-3/4" x 76" 903243 232988  

Forced Direct Vent, Gas Gun
66,000 & 86,000 Btu/h, Heating, A/C Relay
Model Burner Type Output
Btu/h
AFUE Wght. W x D x H Mfg. # Part # Price
M1BA-066AAW Pressure w/Elect Ign. 56,000 82.2 149 19-3/4" x 24" x 56" 903270 233018  
M1BB-086AAW* Pressure w/Elect Ign. 57,000 81.0 150 19-3/4" x 24" x 56" 903255 233019  
*A/C ready up to three tons

M7RL Series
High Efficiency / Direct Vent
Condensing Downflow Gas Furnace
Induced Draft - 95%+ AFUE, Input 45,000 thru 72,000 Btuh
The high efficiency downflow gas furnace is designed for both Manufactured Housing and Modular Housing. It may be installed in a utility room, or enclosed in a closet. CSA design certified for use in the United States and Canada. Also see Breakdown Illustraion.
 
• 100% fired and tested: All units and each component (both mechanical and electrical) are tested on the manufacturing line.
• Clean and quiet operation: Due to the unique design of in-shot burners, location of inducer and use of insulation.
• Fixed 30 second blower delay: At burner start-up assures a warm outlet air temperature at furnace start-up. Adjustable blower off settings (60, 90, 120 and 180 seconds).
• Fixed 30-second post purge: Increases life of heat exchanger.
• Dependable, hot surface ignitor: Innovative application of silicon nitride type igniter. Utilizes proven Smartlite technology.
• Tubular primary heat exchanger: Heavy gauge aluminized steel heat exchanger assures a long life.
• Stainless steel secondary heat exchanger: Assures a long life.
• 90 second fixed cooling cycle blower-off delay (TDR): Increases cooling performance when matched with NORDYNE coil.
• Sealed combustion approved for direct vent furnace, category IV venting system: May be vertically or horizontally vented using a two-pipe system for maximum flexibility in installation.
• LP convertible: Simple burner orifice and gas valve regulator change for ease of convertibility.
• Multi-speed direct drive blower: Designed to give a wide range of cooling capacities. Switches on PCB, provide ultra easy motor speed selection. 40VA transformer included.
• 3 amp fuse protection against low voltage shorts: Protects transformer and control board.
• Low voltage terminal board: For easy field wiring.
• Easy open pawl latch: Secures the door firmly for transit, yet allows easy removal for access.
• Appliance quality door: Protects against rust and other corrosion. Baked enamel finish allows for easy cleaning.
• Fully insulated cabinet: Insures minimized heat loss and quiet operation.
• Color coded wire harness: Designed to fit the components, all with quick-connect fittings for ease of service and replacement.
• High efficiency blower kits maximize efficiencies. On select units, a SEER improvement of up to 1 point is realized.
• Diagnostic lights for easy troubleshooting without counting flashes: Dedicated light for flame signal strength and 2 lights in combination to indicate all other fault codes with easy to recognize states without counting flashes.
• Incorporates integrated control board with connections for electronic air cleaner and humidifier.
 
AW Models 19-7/8"W x 24-5/8"D x 56"H
BW Models 19-7/8"W x 24-5/8"D x 76"H
Model Wght. Mfg. # Part # Price
M7RL 045A AW Short Furnace 150 921328 233230  
M7RL 045A BW Tall Furnace 170 921329 233231  
M7RL 060A AW Short Furnace 150 921331 233232  
M7RL 060A BW Tall Furnace 170 921332 233233  
M7RL 072A AW Short Furnace 155 921334 233234  
M7RL 072A BW Tall Furnace 175 921335 233235  

M5 Series Furnace
M5S* Oil Gun
The M5 Series furnace is designed for all sizes of manufactured and modular homes. These units incorporate high efficiency, reliability, and low maintenance. Units may also be installed free standing in a utility room or enclosed in an alcove or closet. M5 Series furnaces are available in A/C adaptable or A/C ready, with or without coil cavity box, multiple blower combinations for cooling requirements, and many burner options.
 
• Sealed Combustion System: Vents exhaust gas directly outdoors and draws in 100% outside air for the burner.
• Easy Open Pawl Latch: Secures the door firmly for transit, yet allows easy removal for access.
• Choice of Air Conditioning Options: From 2 to 5 tons A/C ready.
• Large, Effective Air Filter: Room air is cleaner with this permanent washable filter.
• High Efficiency Drum Heat Exchanger: Delivers optimum heat transfer with low air resistance.
• Appliance Quality Door: Protects against rust and other corrosion. Baked enamel finish allows for easy cleaning.
• Fully Insulated Cabinet: Insures minimized heat loss and quiet operation.
• Reliable Burner: With uniform flame pattern extends life of heat exchanger.
 
Model Output
MBtu/h
Wght.
A Cabinet
Wght.
B Cabinet
Mfg. # Part # Price
M5SB-066-AAW 56 151 165 921212 233024  
M5SB-086-AAW 73 158 173 921209 233025  
M5SB-066-ABW 56 151 165 921211 233026  
M5SB-086-ABW 73 158 173 921208 233027  

E3EB-XXX-H Series
Downflow, Uplflow Electric Furnaces
The E3 Series furnace is designed for all sizes of manufactured and modular homes. These units incorporate reliability and low maintenance. Units may also be installed free standing in a utility room or enclosed in an alcove or closet. E3 Series furnaces are available in A/C adaptable or A/C ready, with multiple blower combinations for cooling requirements.
 
• Choice of Air Conditioning options From 2 to 5 tons A/C ready.
• Easy Open Door secures the door firmly for transit, yet allows easy removal for access.
• Effective Air Filter Universal disposable filter is reayily available and simple to replace.
• Nichrome Heating Elements provide long lasting, efficient heating.
• Appliance Quality Door protects against rust and other corrosion. Baked enamel finish allows for easy cleaning.
• Fully Insulated Cabinet: Insures minnimized heat loss and quiet operation.
• Safety and Dependablitiy: Auto reset controls protect unit's electrical circuitry and help ensures trouble free performance. Built in circuit breakers for extra safety.
• Adaptable: Unit can be adapted to provide dependable heating in either downflow or upflow mode.
• Versatile: Works with self-contained or split system air conditioners or heat pumps.
• Dimensions: 20" wide, 29" high, 24.5" deep.
 
Model Output
Heat Btuh
Mfg. # Part # Price
E3EB-010H 35,000 904129 238089  
E3EB-015HBR 35,000 901454 238090  
E3EB-012H 41,000 904130 238091  
E3EB-015H 53,000 904131 238092  
E3EB-017H 57,000 904132 238093  
E3EB-020H 70,000 904133 238094  
E3EB-023H 75,000 904134 238095